1/2
Material Safety Data Sheet
1. CHEMICAL PRODUCT AND COMPANY IDENTOFICATION
Company
WAH HONG INDUSTRIAL CORP.
6&7Room, 11F,NO.235 CHUNG CHENG 4TH ROAD KAOHSIUNG TAIWAN R.O.C 886-7-2729600 886-7-6153707 886-7-2725732
Address Information Phone No Emergency Phone No. Fax No.
Product Name
UP MOLDING COMPOUND
WH-8100 series 2.COMPOSITION /INFORMATION ON INGREDIENTS
Substance or Preparation Chemical NAME Content Formula CAS NO
PREPARATION
UNSATURATED POLYESTER（UP） MOLDING COMPOUND UP:25%
FILLER:40~50% FIBER:20~30%
UP[C6H5 CHCH2]n Al(OH)3 SiO2NONE
None
Impurities Contributing to Hazards
3. HAZARD IDENTIFICATION
Most Important Hazards
None None None None
Adverse Human Health Effects Environmental Effect
Physical and Chemical Hazards
4.FIRST AID MEASURES Inhalation Eye Contact Ingestion
MOVE SUBSECT TO FRESH AIR
Flush with plenty water for at least 2 minutes, seek medical advice if necessary Induce vomiting rinse mouth with water
Skin Contact Wash with water, seek medical advice if necessary
5. FIRE-FIGHTING MEASURES Extinguishing Media
None None None
Special Fire-Fighting Procedure
Fire and Explosion Hazards
6. ACCIDENTAL RLEASE MEASURES Methods for Cleaning up
Personal Precautions
Environmental Precautions
Recovery if not contaminated or Disposal, Remained on ground may cause slipping
Gather pellets and-powder thoroughly to avoid birds or fishes taking from draining water
Material Safety Data Sheet
7. HANDLING AND STORAGE
Handling
2/2
Storage
Prevent from fire around handling area. Maintain good housekeeping standards to prevent accumulation of dust. To avoid dust explosion resulting form the existence of powder, electrostatics eliminators and grounding should be fixed to such equipment’s as air transferring pipes, bag filters and hoppers. Use electrically conductive filters for bag filters.
Keep the materials at a cool dry place. Protect form direct sunlight, rain and violent temperature fluctuation. Fire is inhibited around storage area.
8.EXPOSURE CONTROLS/PERSONAL PROTECTION
Threshold Limit Value Ventilation
Personal Protection Eye Respiratory Gloves
Not determined
Necessary to exclude dust, fumes and gases.
Wear safety glasses for general purpose. Wear chemical goggles for cleaning molding machines
Wear masks for cleaning molding machines. Necessary for handling melted resin.
9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Granular type
Temperature OVER 200℃
Solubility SOLUBLE IN METHYLETHYL KTONE Specific Gravity
1.85-1.95
10. STTABILITY AND REACTIVITY
Flammability No Flash Point
No
No No
Stable and non-reactive under normal handling and storage
condition.
Auto-ignition Temperature Reactivity with Water Stability
11. TOXICOLOGICAL INFORMATION
Imitation
MAYBE IRRITANT TO EYES Not determined Not determined
Acute oral toxicity (LD50) Mutagenicity
12. ECOLOGICAL INFORMATION
TO avoid being taken by ocean species or birds ,disposal of the waste to the ocean and water courses is inhibited.
13. DISPOSAL CONSIDERATIONS
Controlled incineration or landfill according to local, state or national laws and regulations concerning health and pollution.
14. TRANSPORT INFORMATION
Not classified
15. REGULATORY INFORMATION
Not available
16. OTHER INFORMATION
None
因篇幅问题不能全部显示，请点此查看更多更全内容