G6D

Slim, Miniature Relay, Capable of

Relaying Programmable Controller and Temperature Controller Outputs

■■■■■■

G6D

Slim and miniature: 17.5 × 6.5 × 12.5 mm (L × W × H).

Ideal for high-density mounting.Switches 5 A at 250 VAC/30 VDC.

Allows 300,000 operations with a 2-A load at 250 VAC or 30 VDC.

Actual load switching capability equals the G6B’s capability.

Washable construction.

RCE

Enclosure ratings

Fully sealed

G6D-1A-ASI

Model

Ordering Information

Classification

Standard

Contact form

SPST-NO

Note: When ordering, add the rated coil voltage to the model number.Example: G6D-1A-ASI 12 VDCRated coil voltageModel Number Legend

G6D - - VDC12341. Number of Poles 1: 1 pole2. Contact Form A: SPST-NO■

3. Contact Material ASI: Silver alloy (cadmium-free)4. Rated Coil Voltage 5, 12, 24 VDCAccessories (Order Separately)

P6D-04P

Connecting Socket■

Coil Ratings

5 VDC40 mA125 Ω

70% max. of rated voltage10% min. of rated voltage160% of rated voltage (at 23°C)Approx. 200 mW

12 VDC16.7 mA720 Ω

24 VDC8.3 mA2,880 Ω

Rated voltageRated currentCoil resistanceMust operate voltageMust release voltageMax. voltagePower consumptionNote:

The must operate voltage is 75% or less of the rated voltage if the relay is mounted upside down.

1

G6D

■

G6D

Contact Ratings

5 A at 250 VAC, 5 A at 30 VDC, resistive load5 A

250 VAC, 30 VDC5 A

1,250 VA, 150 W10 mA at 5 VDC

–6Rated load

Rated carry currentMax. switching voltageMax. switching currentMax. switching powerFailure rate (reference value)Note:■

P level: λ60 = 0.1 x 10/operation

Characteristics

100 mΩ max.10 ms max.5 ms max.

1,000 MΩ min. (at 500 VDC)

3,000 VAC, 50/60 Hz for 1 min between coil and contacts

750 VAC, 50/60 Hz for 1 min between contacts of same polarity6,000 V (1.2 x 50 µs) between coil and contacts

Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)Malfunction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)Destruction: 1,000 m/s2Malfunction: 100 m/s2

Mechanical:20,000,000 operations min. (at 18,000 operations/hr)Electrical:70,000 operations min. (5 A at 250 VAC/30 VDC, resistive load)

300,000 operations min. (2 A at 250 VAC/30 VDC, resistive load)Operating: −25°C to 70°C (with no icing)Operating: 5% to 85%Approx. 3 g

Contact resistanceOperate timeRelease timeInsulation resistanceDielectric strengthImpulse withstand voltageVibration resistanceShock resistanceEndurance

Ambient temperatureAmbient humidityWeight

Engineering DataMaximum Switching PowerSwitching current (A)5030EnduranceEndurance (x104 operations)500300Ambient Temperature vs. Maximum Coil VoltageMaximum coil voltage (%)200180160140120100806001053AC resistive load1005030250-VAC/30-VDC resistive loadDC resistiveload10.50.3DC inductiveloadAC inductive loadcosφ=0.4105250-VAC/30 VDC inductive load3(cosφ=0.4/ L/R=7 ms)0.103510301002505001,000100 1 2 3 4 5 6 7 8 9 2330405060708090Switching voltage (V)Switching current (A)Ambient temperature (°C)Ambient Temperature vs. Operating/Recovery Voltage G6D-1A-ASIOperating/recovery voltage (ratio of rated voltage) (%)100Malfunctioning Shock G6D-1A-ASIY1,000800X600400200ZNote: The maximum coil voltage is the maximum voltage that can be applied to the relay coilSample: G6D1AQuantity: 5 80Operating voltageRecovery voltagemax.60Xmin.40206max.Xmin.Z'Not energizedEnergized−20020406080X'YY'Unit: m/s220Shock directionXX'ZZ'Coil terminals0−40Y'Ambient temperature (°C)Measurement conditions: Impose a shock in the ±X, ±Y, and ±Z directions three times each with the Relay energized to check the shock values that cause the Relay to malfunction.2

G6D

■

G6D

Approved Standards

(File No. E41515) UL508

Number of poles1

Coil ratings5 to 24 VDC

Contact ratings

Number of test operations

•The rated values approved by each of the safety standards may be different from the performance characteristics individually defined inthis catalog.

UL Approval

ModelG6D-1A-ASI

5 A, 250 VAC (General Use)6,0005 A, 30 VDC

CSA Approval

ModelG6D-1A-ASI

(File No. LR31928) C22.2 No. 14

Number of poles1

Coil ratings5 to 24 VDC

Contact ratings

Number of test operations

5 A, 250 VAC (General Use)6,0005 A, 30 VDC (Resistive)

EN/TÜV Approval

ModelG6D-1A-ASI

(Registration No. R50029064/EN61810-1)

Coil ratings5, 12, 24 VDC

Contact ratings5 A, 250 VAC (cosφ=1.0)5 A, 30 VDC (0 ms)

Number of test operations70,000

Number of poles1

Dimensions

Note:

1.All units are in millimeters unless otherwise indicated.2.Orientation marks are indicated as follows: (6.4)*G6D-1A-ASI0.517.5 max.(17.3)* 6.5 max.Terminal Arrangement/Internal Connections (Bottom View)12.5 max.(12.4)*3.51572.542.54Mounting Holes(Bottom View)Tolerance: ±0.1Four, 1.1-dia.holes(0.71)0.52.540.87.62.5.085.080.3135.08*Average valueP6D-04P Socket6.9 max.(6.7)*19.7 max.(19.5)*(1.13)10.165.08Mounting Holes(Bottom View)Tolerance: ±0.1Four, 1.1-dia. (2.18)holes(0.86)10.82.546+0.13.60.652.540.376.25.08*Average value15.245.082.543

G6DG6D

Precautions

More than two relays can be closely mounted right side up as shown in the following illustration.

6.5 mm18.5 mm max.Socket Mounting Height

Current flow: 5 A max.More than two relays can be closely mounted upside down as shown in the following illustration.

7.62 mm in the upside-down directionWhen mounting the relay, insert it into the socket as vertically as possible so that the relay terminals contact securely with the con-tact pins on the socket.

The P6D is flux-resistive. Do not wash the P6D with water.

Dismount the relay from the socket before soldering the socket to a PCB.

Current flow: 2 A max.1.12 mmNote:

The space between each relay required for heat radiationmay vary with operating conditions. Contact your OMRONrepresentative for details.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

Cat. No. K127-E1-02In the interest of product improvement, specifications are subject to change without notice.

OMRON RELAY & DEVICES CorporationC&C Power Relay DivisionMarketing Department1110 Sugi, Yamaga-City,Kumamoto, 861-0596 Japan

Tel: (81)968-44-4160/Fax: (81)968-44-4107

Printed in Japan1208

4