Copyright, 2009, Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
This material safety data sheet (MSDS) is provided as a courtesy in response to a customer request. This product is not regulated under, and a MSDS is not required for this product by the OSHA Hazard Communication Standard (29 CFR 1910.1200) because, when used as recommended or under ordinary conditions, it should not present a health and safety hazard. However, use or processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the performance of the product and may present potential health and safety hazards.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: ELECTRICAL TAPE 1298, 1350, 1350F, 1350T, LRT-S/Y MANUFACTURER:
DIVISION: International Operations
Electrical Markets Division
ADDRESS: Center
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)Issue Date: 03/10/2009Supercedes Date: 10/21/2005Document Group:07-7791-2Product Use:
Intended Use:
ELECTRICAL INSULATION
SECTION 2: INGREDIENTSIngredientPOLYESTER FILM
FLAME RETARDENT ADHESIVE
C.A.S. No.None
Trade Secret
% by Wt40 -5040 -50
SECTION 3: HAZARDS IDENTIFICATION3.1 EMERGENCY OVERVIEW
Specific Physical Form: Roll of TapeOdor, Color, Grade: White or YellowGeneral Physical Form: Solid
Immediate health, physical, and environmental hazards: This product, when used under reasonable conditions and in accordance with the directions for use, should not present a health hazard. However, use or processing of the product in a manner not in accordance with the product's directions for use may affect the performance of the product and may present potential
_________________________________________________________________________________________________Page 1of 6
MATERIAL SAFETY DATA SHEET ELECTRICAL TAPE 1298, 1350, 1350F, 1350T, LRT-S/Y health and safety hazards.
3.2 POTENTIAL HEALTH EFFECTS
Eye Contact:
No health effects are expected.Skin Contact:
No health effects are expected.Inhalation:
No health effects are expected.Ingestion:
No health effects are expected.
SECTION 4: FIRST AID MEASURES4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are followed.Eye Contact: Skin Contact: Inhalation: If Swallowed:
No need for first aid is anticipated. No need for first aid is anticipated. No need for first aid is anticipated.
No need for first aid is anticipated.
SECTION 5: FIRE FIGHTING MEASURES5.1 FLAMMABLE PROPERTIES
Autoignition temperatureFlash Point
Flammable Limits -LELFlammable Limits -UEL
Not ApplicableNot ApplicableNot ApplicableNot Applicable
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus (SCBA).
Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated.
_________________________________________________________________________________________________Page 2of 6
MATERIAL SAFETY DATA SHEET ELECTRICAL TAPE 1298, 1350, 1350F, 1350T, LRT-S/Y Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition information.SECTION 6: ACCIDENTAL RELEASE MEASURESAccidental Release Measures:Not applicable.
SECTION 7: HANDLING AND STORAGE7.1 HANDLING
This product is considered to be an article which does not release or otherwise result in exposure to a hazardous chemical under normal use conditions. Store at temperature and conditions as recommended on product literature.
7.2 STORAGE
Not applicable.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 ENGINEERING CONTROLS
Not applicable.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face ProtectionNot applicable.
8.2.2 Skin Protection
Not applicable. Gloves are not required.
8.2.3 Respiratory Protection
Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection.8.2.4 Prevention of SwallowingNotapplicable.
8.3 EXPOSURE GUIDELINES
IngredientANTIMONY COMPOUNDSANTIMONY COMPOUNDS
AuthorityACGIHOSHA
TypeTWA, as SbTWA, as Sb
Limit0.5 mg/m3 0.5 mg/m3
Additional InformationTable Z-1A
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIESSpecific Physical Form:
Roll of Tape
_________________________________________________________________________________________________Page 3of 6
MATERIAL SAFETY DATA SHEET ELECTRICAL TAPE 1298, 1350, 1350F, 1350T, LRT-S/YOdor, Color, Grade: General Physical Form: Autoignition temperatureFlash Point
Flammable Limits -LELFlammable Limits -UELBoiling pointDensity
Vapor DensityVapor PressureSpecific GravitypH
Melting point
Solubility In Water
Evaporation rate
Volatile Organic CompoundsPercent volatile
VOC Less H2O & Exempt SolventsViscosity
White or YellowSolid
Not ApplicableNot ApplicableNot ApplicableNot ApplicableNot ApplicableNo Data AvailableNot ApplicableNot ApplicableNo Data AvailableNot ApplicableNo Data AvailableNo Data AvailableNot ApplicableNot ApplicableNot ApplicableNot ApplicableNot Applicable
SECTION 10: STABILITY AND REACTIVITYStability:Stable.
Materials and Conditions to Avoid: None known
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
SubstanceCarbon monoxideCarbon dioxide
ConditionDuring CombustionDuring Combustion
Hazardous Decomposition: Under recommended usage conditions, hazardous decomposition products are not expected. Hazardous decomposition products may occur as a result of oxidation, heating, or reaction with another material.
SECTION 11: TOXICOLOGICAL INFORMATIONPlease contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its components.SECTION 12: ECOLOGICAL INFORMATIONECOTOXICOLOGICAL INFORMATION
Not applicable.
_________________________________________________________________________________________________Page 4of 6
MATERIAL SAFETY DATA SHEET ELECTRICAL TAPE 1298, 1350, 1350F, 1350T, LRT-S/YCHEMICAL FATE INFORMATION
Not applicable.
SECTION 13: DISPOSAL CONSIDERATIONSWaste Disposal Method: Dispose of waste product in a sanitary landfill. As a disposal alternative, incinerate in an industrial or commercial facility.
EPA Hazardous Waste Number (RCRA):Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.SECTION 14:TRANSPORT INFORMATIONID Number(s):
80-6112-0391-2, XE-0021-8753-4, XE-0042-1630-7, XE-0042-1773-5
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this material.SECTION 15: REGULATORY INFORMATIONUS FEDERAL REGULATIONS
Contact for more information.
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Immediate Hazard - No Delayed Hazard - No
STATE REGULATIONS
Contact for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
All applicable chemical ingredients in this material are listed on the European Inventory of Existing Chemical Substances (EINECS), or are exempt polymers whose monomers are listed on EINECS.
This product is an article as defined by TSCA regulations, and is exempt from TSCA Inventory listing requirements.Contact for more information.
_________________________________________________________________________________________________Page 5of 6
MATERIAL SAFETY DATA SHEET ELECTRICAL TAPE 1298, 1350, 1350F, 1350T, LRT-S/Y INTERNATIONAL REGULATIONS
Contact for more information.
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.SECTION 16: OTHER INFORMATIONNFPA Hazard Classification
Health: 0 Flammability: 0 Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
Reason for Reissue: The MSDS has been revised because has adopted the 16-section ANSI/ISO format. The potential hazards of the product have not changed. We encourage you to reread the MSDS and review the information. Revision Changes:
Section 1: Division name was modified.Copyright was modified.
Section 1: Secondary Division name was added.
Section 14: ID Number Heading Template 1 was added.Section 14: ID Number(s) Template 1 was added.Section 2: Ingredient table was added.
Section 8: Exposure guidelines ingredient information was added.
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the product is fit for a particular purpose and suitable for user's method of use or application. Given the variety of factors that can affect the use and application of a product, some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the product to determine whether it is fit for a particular purpose and suitable for user's method of use or application.
provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may have resulted in errors, omissions or alterations in this information, makes no representations as to its completeness or accuracy. In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
_________________________________________________________________________________________________Page 6of 6
因篇幅问题不能全部显示，请点此查看更多更全内容